【人工智能大作业】A*和IDA*搜索算法解决十五数码(15-puzzle)问题 (Python实现)(启发式搜索)

Astar和IDAstar搜索算法解决十五数码(15-puzzle)问题

(文末附实现代码,此前为理论与具体问题分析)

文章目录

  • Astar和IDAstar搜索算法解决十五数码(15-puzzle)问题
      • (文末附实现代码,此前为理论与具体问题分析)
  • 一、实验题目:
  • 二、实验内容
      • 启发式函数设计:
        • 算法原理:
            • I. A*算法
            • II. IDA*算法
            • 算法步骤:
    • 三、实验结果及分析
      • 1.启发式函数
          • 启发式函数1: 错置的数码块个数之和
          • 启发式函数2: 曼哈顿距离
          • 启发式函数1和启发式函数2的效率比较:
            • 关键代码:
            • 运行结果:
      • 2.环检测优化
      • 3.A*与IDA*算法性能的比较
      • 4.实验结果
    • 四、算法优化和创新点
      • 1.IDA*搜索算法优化:
        • 关键代码:
      • 2. A*搜索算法优化:
        • 关键代码:
      • 3.实验结果:
          • 总结:
          • 补充:50步以上的测例
            • 50步以上的测例
    • 五、实现代码:
        • A*优化前:
        • A*优化后:
        • IDA*优化前:
        • IDA*优化后:

    一、实验题目:

    利用A*搜索算法和IDA*搜索算法解决15-puzzle问题

    实验测例包括(以列表表示):

    Example1:[[1, 15, 7, 10],[9, 14, 4, 11], [8, 5,0 , 6],[13, 3, 2, 12]]

    Example2: [[1, 7, 8, 10],[6, 9, 15, 14], [13, 3, 0, 4], [11, 5, 12, 2]]

    Example3: [[5, 6, 4, 12], [11, 14, 9, 1], [0, 3, 8, 15], [10, 7, 2, 13]]

    Example4: [[14, 2, 8, 1], [7, 10, 4, 0], [6, 15, 11, 5], [9, 3, 13, 12]]

    额外50步以上测例:

    测例1: [[11, 3, 1, 7], [4, 6 ,8 ,2], [15 ,9 ,10, 13], [14, 12, 5 ,0]]

    测例2: [[14, 10, 6, 0], [4, 9 ,1 ,8], [2, 3, 5 ,11], [12, 13, 7 ,15]]

    测例3: [[14, 10, 6, 0],[4, 9 ,1 ,8],[2, 3, 5 ,11],[12, 13, 7 ,15]]

    测例4: [[6 ,10, 3, 15],[14, 8, 7, 11],[5, 1, 0, 2],[13, 12, 9 ,4]]

    二、实验内容

    本次实验主要针对两种启发式搜索进行实现 A*搜索算法和IDA*搜索算法。

    启发式搜索与盲目搜索或者无信息搜索最大的区别就在于启发式搜索采用了启发信息来引导整个搜索的过程,能够减少搜索的范围,降低求解问题的复杂度。这里的启发信息主要由估价函数组成,估价函数f(x)由两部分组成,从初始结点到当前结点n所付出的实际代价g(n)和从当前结点n到目标结点的最优路径的代价估计值h(n),即 【人工智能大作业】A*和IDA*搜索算法解决十五数码(15-puzzle)问题 (Python实现)(启发式搜索)

    启发式函数设计:

    启发式函数需要满足以下两种性质:

    1.可采纳的(admissible)
    【人工智能大作业】A*和IDA*搜索算法解决十五数码(15-puzzle)问题 (Python实现)(启发式搜索)

    【人工智能大作业】A*和IDA*搜索算法解决十五数码(15-puzzle)问题 (Python实现)(启发式搜索)

    2.单调的(consistent)
    【人工智能大作业】A*和IDA*搜索算法解决十五数码(15-puzzle)问题 (Python实现)(启发式搜索)

    算法原理:

    I. A*算法

    A*搜索算法与BFS类似,但它需要加入估价函数作为启发信息。

    算法步骤

    • 开始

    1.从起点A开始,将其当作待处理的结点加入open表中

    2.将其子结点也加入open表中,计算f(x), g(x),h(x),其中f(x)=g(x)+h(x),g(x)表示当前结点的代价,h(x)为当前结点到达目标的代价的估计

    3.从open表中取出结点A,并将其加入close表中,表示已经扩展过

    • 循环

    4.从open表中弹出f(x)最小的结点C,并加入close表中

    5.将C的子结点加入到open表中

    6.如果待加入open表中的结点已经在open表中,则更新它们的g(x),保持open表中该结点的g(x)最小

    II. IDA*算法
    算法步骤:

    算法基于深度优先搜索的思想,加入启发信息,对于给定的阈值bound,定义递归过程

    1. 从开始结点C,计算所有子结点的f(x),选取最小的结点作为下一个访问结点
    2. 对于某个节点,如果其f(x)大于bound,则返回当前结点的f(x),取当中最小的f(x)对bound进行更新
    3. 进行目标检测

    三、实验结果及分析

    【注:实验结果文件均保存于result文件夹中,其中包含搜索的路径,探索的结点个数,运行时间以及IDAstar的搜索限制值】

    1.启发式函数

    选取不同的启发式函数会对算法的效率造成一定程度的影响,现针对两种启发式函数进行分析。

    启发式函数1: 错置的数码块个数之和

    在这个启发式函数中,需要统计当前状态下被错置的数码块之和,其值作为当前状态的H(x)。

    启发式函数2: 曼哈顿距离

    在这个启发式函数中,利用曼哈顿距离公式 【人工智能大作业】A*和IDA*搜索算法解决十五数码(15-puzzle)问题 (Python实现)(启发式搜索)

    对除了数码块0以外的所有数码块计算其曼哈顿距离,并将其累加作为当前状态的总曼哈顿距离,

    注:计算曼哈顿距离时之所以排除数码块0,是因为若考虑数码块0,则不满足可采纳性(Admittable) 【人工智能大作业】A*和IDA*搜索算法解决十五数码(15-puzzle)问题 (Python实现)(启发式搜索),这个启发式函数就不满足算法的最优性。

    举个简单的例子来证明这个结论,若现在的状态为如下: 那么下一步肯定是将数码块0向右移动一格,也就是代价为1, 而当前状态的【人工智能大作业】A*和IDA*搜索算法解决十五数码(15-puzzle)问题 (Python实现)(启发式搜索),也就是说【人工智能大作业】A*和IDA*搜索算法解决十五数码(15-puzzle)问题 (Python实现)(启发式搜索), 这就与可采纳性矛盾。

    1 2 3 4

    5 6 7 8

    9 10 11 12

    13 14 0 15

    启发式函数1和启发式函数2的效率比较:

    为了比较这两种启发式函数的效率,并且获得具体的数值,现采用25步的测例进行实验。

    关键代码:

    (1)启发式函数1:

    (2)启发式函数2:

    运行结果:

    在A*搜索算法上:

    启发式函数1:

    image-20220316165532060

    启发式函数2:

    image-20220316170004648

    从结果可以看出,采用启发式函数1需要扩展更多的结点,且运行时间更慢。

    因此,在之后的实验中,均采用曼哈顿距离作为启发式函数。

    2.环检测优化

    • A*搜索算法

      优化说明:在A*搜索算法中维护的close表起到了环检测的作用,将扩展过的结点加入到close表中,在每次需要扩展新的结点的时候查找在close表中有没有出现,若没有出现,则将其加入到open表中,作为待扩展结点。因此,我们要针对close表进行优化,达到以更优的效率进行查表。

      实现方法:以set容器作为close表的数据结构,将数码矩阵状态转换成字符串,再通过python内置的hash函数转换成唯一的哈希值。

      优化原理: 对比list,以set容器作为close表存储状态的数据结构性能更优,基于针对close表的操作只有插入和查表两种操作,在查找的性能方面set肯定是优于list;实践是检验真理的唯一标准,我们针对list和set对于查找的性能做一个简单的实验

      以下是在list和set中找出随机数是否存在其相反数。

      image-20220314200051316

      从结果可以看出,set在50000个数据中查找的速度是list的1640倍。在这种情况下,如果选择使用list作为close表,效率可想而知是不如set的。

      关键代码:

      此处 CLOSE = set() close表定义为set容器

      image-20220314201011014

      在代码中,将生成的子结点的状态转换成字符串,再通过hash函数(hash函数只能以字符串、数字、字典、集合作为参数)获取其哈希值存到close表中, 在第110行中就用到了查表,如果close表中不存在该结点,则将其加入到close表中。

    • IDA*搜索算法

      IDA*搜索算法本质上为深度优先搜索算法,它在空间上有比广度优先算法更优的性能,即 【人工智能大作业】A*和IDA*搜索算法解决十五数码(15-puzzle)问题 (Python实现)(启发式搜索) (其中b是后继结点的个数,m是搜索树的深度),因为它不需要使用队列来保存已经拓展过的结点,如果IDA* 采用了环检测则会破坏它在空间上的最优性。

      因此,对于IDA*的优化并没有采用环检测,而是采用路径检测(这将会在之后讨论到)

    3.A与IDA算法性能的比较

    ​ 启发式函数:曼哈顿距离

    ​ 数码状态存储数据结构:List

    ​ 环检测数据结构:Set

    4.实验结果

    (运行结果路径可在Github仓库中的Results文件下载)
    测例1 [[1, 15, 7, 10],[9, 14, 4, 11], [8, 5,0 , 6],[13, 3, 2, 12]]

    A* 搜索算法运行结果:

    Test 1, Total Step 40 
    Used Time 0.303069 sec
    Expanded 2765 nodes
    

    IDA* 搜索算法运行结果:

    Test 1, Total Step 40 
    Used Time 1.194115 sec
    Expanded 25590 nodes
    Bound: 40
    

    测例2 [[1, 7, 8, 10],[6, 9, 15, 14], [13, 3, 0, 4], [11, 5, 12, 2]]

    A* 搜索算法运行结果:

    Test 2, Total Step 40 
    Used Time 0.130206 sec
    Expanded 4009 nodes
    

    IDA* 搜索算法运行结果:

    Test 2, Total Step 40 
    Used Time 0.526660 sec
    Expanded 6348 nodes
    Bound: 40
    

    测例3 [[5, 6, 4, 12], [11, 14, 9, 1], [0, 3, 8, 15], [10, 7, 2, 13]]

    A* 搜索算法运行结果:

    Test 3, Total Step 40 
    Used Time 0.089238 sec
    Expanded 575 nodes
    

    IDA* 搜索算法运行结果:

    Test 3, Total Step 40 
    Used Time 0.241839 sec
    Expanded 2602 nodes
    Bound: 40
    

    测例4 [[14, 2, 8, 1], [7, 10, 4, 0], [6, 15, 11, 5], [9, 3, 13, 12]]

    A* 搜索算法运行结果:

    Test 4, Total Step 40 
    Used Time 0.985068 sec
    Expanded 15017 nodes
    

    IDA* 搜索算法运行结果:

    Test 4, Total Step 40
    Used Time 18.741641 sec
    Expanded 252281 nodes
    Bound: 40
    

    总结:

    测例Example1Example2Example3Example4
    Used Time [A*| IDA*]0.30|1.190.13|0.520.06|0.240.98|18.74
    Expanded Nodes [A* | IDA*] (nodes)2765 | 255904009 |6348575|260215017|252281
    Better [A* | IDA*]A*A*A*A*

    从以上A* 与IDA*在深度为40的搜索树的表现情况来看,A*的搜索效率大于IDA*,此外,从扩展的结点个数来看,IDA* 扩展的结点数更多,这跟IDA*本身搜索的方式有关。 由于A* 需要保存扩展过的结点,因此内存消耗远大于IDA* ,至此,可以猜测IDA*在深度更大的搜索问题上表现会比A*更优,A*需要使用复杂度logn优先队列进行排序,可想而知当待扩展的结点数目剧增的时候,就需要对大量的结点进行排序,存储开销会非常大。

    为了验证这个猜想,现采用需要移动49步的15 puzzle进行实验:

    测例 [[14, 10, 6, 0],[4, 9 ,1 ,8],[2, 3, 5 ,11],[12, 13, 7 ,15]]

    A* 搜索算法运行结果:

    Test 2, Total Step 53
    Used Time 511.812972 sec
    Expanded 22587975 nodes
    

    IDA* 搜索算法运行结果:

    Test 2, Total Step 49
    Used Time 493.416811 sec
    Expanded 9890739 nodes
    Bound: 49
    

    从实验结果可以看出,在搜索深度更大的情况下,IDA*的表现比A*更优。可以猜测到,深度加大以后 A*需要在优先队列中对更多的进行排序,这大大降低了搜索的效率,

    四、算法优化和创新点

    在以上算法的实现中,存储数码状态的数据结构均为List,Tuple相对与list来说,在存储空间上显得更加轻量级一些。对于元组这样的静态变量,如果它不被使用并且占用空间不大时,Python 会暂时缓存这部分内存。这样,下次我们再创建同样大小的元组时,Python 就可以不用再向操作系统发出请求,去寻找内存,而是可以直接分配之前缓存的内存空间,这样就能大大加快程序的运行速度。

    因此,考虑到Tuple在性能上更优,现用Tuple作为存储数码状态的数据结构,对A*和IDA*分别采用此优化方式。

    在子结点的生成中,采用了预生成数码可移动方向(使用时直接查表)和Python内嵌函数的功能进行实现。

    ​ 启发式函数:曼哈顿距离

    ​ 数码状态存储数据结构:Tuple

    ​ 环检测数据结构:Set

    1.IDA*搜索算法优化:

    关键代码:

    • generateChild()

    预生成数码可移动方向、Python内嵌函数

    image-20220315203251177

    这部分主要用于生成状态的子结点,由于将二维矩阵转换成了一维元组,所以在数码0的移动上需要作一些修改,也即是将数码0的坐标进行+1,-1,+4,-4,就可以实现上下左右移动的操作;这里提前生成4×4的数码表上16个位置可以移动的方向,并保存在列表movetable中,并采用python内置函数的功能,可直接调用generateChild()的返回值,获得某个状态的子结点。

    • IDAsearch(g, Hx*, bound)

    剪枝优化

    image-20220315203535012

    这部分是IDA*搜索算法的核心部分,在算法框架的基础上,加入了用set容器实现的CLOSE表,这与优化前不同的是,在优化之前,仍然是采用list进行路径检测,而之前提到过,从查找的角度来说,set的性能在大量数据的前提下是优于list的,因此在这里采用set进行判重,一方面起到了剪枝的作用,一方面能起到优化算法运行效率的作用。

    2. A*搜索算法优化:

    关键代码:

    优化后:

    • A_star(start, Fx)

    image-20220315212714796

    这里为A*搜索算法的核心部分,环检测中以set作为状态存储的容器,这里的状态都以Tuple进行存储,因此可以直接加入set中;生成子结点的方式采用了与上方IDA*同样的实现方式。

    优化前:

    image-20220315213300041

    与优化前进行对比,由于采用了列表来存储状态,因此加入set中需要将其转换成字符串的形式,同时包含了繁琐的计算坐标移动的三重for循环。

    3.实验结果:

    下面,我们来看看在Example1-4上优化后的算法的结果如何:

    Example1

    A* 搜索算法运行结果:

    Test 1, Total Step 40 
    Used Time 0.092726 sec
    Expanded 3055 nodes
    

    IDA* 搜索算法运行结果:

    Test 1, Total Step 40 
    Used Time 0.261489 sec
    Expanded 16334 nodes
    Bound: 40
    

    Example2

    A* 搜索算法运行结果:

    Test 2, Total Step 40 
    Used Time 0.039616 sec
    Expanded 4240 nodes
    

    IDA* 搜索算法运行结果:

    Test 2, Total Step 40 
    Used Time 0.271453 sec
    Expanded 30105 nodes
    Bound: 40
    

    Example3

    A* 搜索算法运行结果:

    Test 3, Total Step 40 
    Used Time 0.016239 sec
    Expanded 4779 nodes
    

    IDA* 搜索算法运行结果:

    Test 3, Total Step 40 
    Used Time 0.098768 sec
    Expanded 37683 nodes
    Bound: 40
    

    Example4

    A* 搜索算法运行结果:

    Test 4, Total Step 40 
    Used Time 0.483208 sec
    Expanded 15259 nodes
    

    IDA* 搜索算法运行结果:

    Test 4, Total Step 40 
    Used Time 5.040609 sec
    Expanded 256103 nodes
    Bound: 40
    

    总结:

    测例Example1Example2Example3Example4
    优化前Used Time [A*| IDA*] (sec)0.30|1.190.13|0.520.06|0.240.98|18.74
    优化后Used Time[A* | IDA*] (sec)0.09|0.260.03|0.270.01|0.090.48|5.04
    Better [A* | IDA*]A*A*A*A*

    优化前与优化后对比,IDA*在运行时间上最高提高了4.5倍的性能,最少也有提升大约1.5倍,A*在运行时间上最多提升6倍,最少提升了2倍。两者之中在这四个测例上仍然是A*算法占优。

    补充:50步以上的测例

    除了Example1-4上的测例以外,这里针对50步以上的测例四个测例,以优化前和优化后进行对比实验:

    50步以上的测例

    测例1 [[11, 3, 1, 7],[4, 6 ,8 ,2],[15 ,9 ,10, 13],[14, 12, 5 ,0]]

    A* 搜索算法运行结果:

    优化前
    Test 1, Total Step 56
    Used Time 2271.522129 sec
    Expanded 18113640 nodes
    
    优化后
    Test 1, Total Step 56
    Used Time 1077.335515 sec
    Expanded 18116567 nodes
    

    IDA* 搜索算法运行结果:

    优化前:
    时间过长
    
    优化后:
    Test 1, Total Step 56 
    Used Time 11228.500149 sec
    Expanded 861726906 nodes
    Bound: 56
    

    测例2 [[14, 10, 6, 0],[4, 9 ,1 ,8],[2, 3, 5 ,11],[12, 13, 7 ,15]]

    A* 搜索算法运行结果:

    优化前:
    Test 2, Total Step 53
    Used Time 511.812972 sec
    Expanded 22587975 nodes
    
    
    优化后:
    Test 2, Total Step 49
    Used Time 54.638738 sec
    Expanded 4438912 nodes
    Bound: 49
    

    IDA* 搜索算法运行结果:

    优化前:
    Test 2, Total Step 49
    Used Time 493.416811 sec
    Expanded 9890739 nodes
    Bound: 49
    
    优化后:
    Test 2, Total Step 49
    Used Time 54.638738 sec
    Expanded 4438912 nodes
    Bound: 49
    

    测例3 [[0, 5, 15, 14],[7, 9, 6 ,13],[1, 2 ,12, 10],[8, 11, 4, 3]]

    A* 搜索算法运行结果:

    优化前:
    Test 3, Total Step 64 
    Used Time 13271.092952 sec
    Expanded 124070829 nodes
    
    优化后:
    Test 3, Total Step 64
    Used Time 5099.071962 sec
    Expanded 124434683 nodes
    

    IDA* 搜索算法运行结果:

    优化前:
    时间过长
    
    优化后:
    时间过长
    

    测例4 [[6 ,10, 3, 15],[14, 8, 7, 11],[5, 1, 0, 2],[13, 12, 9 ,4]]

    A* 搜索算法运行结果:

    优化前:
    Test 4, Total Step 48 
    Used Time 170.719640 sec
    Expanded 125820596 nodes
    
    优化后:
    Test 4, Total Step 48
    Used Time 62.862862 sec
    Expanded 126187137 nodes
    

    IDA* 搜索算法运行结果:

    优化前:
    Test 4, Total Step 48
    Used Time 1111.598261 sec
    Expanded 20291684 nodes
    Bound: 48
    
    优化后:
    Test 4, Total Step 48
    Used Time 419.185472 sec
    Expanded 34135093 nodes
    Bound: 48
    

    总结:

    测例1234
    优化前Used Time [A*| IDA*] (sec)2271.5 |NaN511.8|493.413271.0|NaN170.7|1111.5
    优化后Used Time[A* | IDA*] (sec)1077.3|11228.554.6|54.65099.0| Nan62.8 |419.1
    Better [A* | IDA*]A*IDA*A*A

    五、实现代码:

    或者也可以Clone我的Github仓库并运行代码:Github代码链接

    A*优化前:

    #coding=utf-8
    import copy
    import heapq
    import numpy as np
    import time
    
    
    # 最终状态
    end_state = [[1, 2, 3, 4], [5, 6, 7, 8], [9, 10, 11, 12], [13, 14, 15, 0]]
    node_num  = 0
    
    # 初始状态测例集
    init_state = [
           [[1, 15, 7, 10],[9, 14, 4, 11], [8, 5,0 , 6],[13, 3, 2, 12]],
          #  [[1, 7, 8, 10],[6, 9, 15, 14], [13, 3, 0, 4], [11, 5, 12, 2]],
         #  [[5, 6, 4, 12], [11, 14, 9, 1], [0, 3, 8, 15], [10, 7, 2, 13]],
          #  [[14, 2, 8, 1], [7, 10, 4, 0], [6, 15, 11, 5], [9, 3, 13, 12]]
            # [[11, 3, 1, 7],[4, 6 ,8 ,2],[15 ,9 ,10, 13],[14, 12, 5 ,0]], 
          #   [[14, 10, 6, 0],[4, 9 ,1 ,8],[2, 3, 5 ,11],[12, 13, 7 ,15]],
            # [[0, 5, 15, 14],[7, 9, 6 ,13],[1, 2 ,12, 10],[8, 11, 4, 3]],
            # [[6 ,10, 3, 15],[14, 8, 7, 11],[5, 1, 0, 2],[13, 12, 9 ,4]]
           #   [[1 , 3 ,10 , 4],[5 , 2  ,6 , 8], [14, 11 ,12 , 0], [7, 13,  9 ,15]]
       ]
    
    
    # 方向数组
    dx = [0, -1, 0, 1]
    dy = [1, 0, -1, 0]
    
    OPEN = []
    
    CLOSE = set() # close表,用于判重
    
    path = []
    
    def print_path(node):
        if node.parent != None:
            print_path(node.parent)
        path.append(node.state)
        return path
    
    # 状态结点
    class Node(object):
        def __init__(self, gn=0, hn=0, state=None, hash_value=None, parent=None):
           self.gn = gn
           self.hn = hn
           self.fn = self.gn + self.hn
           self.state = state
           self.hash_value = hash_value
           self.parent = parent
    
        def __lt__(self, node): # heapq的比较函数
            if self.fn == node.fn:
                return self.gn > node.gn
            return self.fn < node.fn
    
    
    def manhattan(state):
        M = 0
        for i in range(4):
            for j in range(4):
                if state[i][j] == end_state[i][j] or state[i][j] == 0:
                    continue
                else:
                    x = (state[i][j] - 1) // 4   # 最终坐标
                    y = state[i][j] - 4 * x -1 
                    M += (abs(x - i) + abs(y - j))
        return M
    
    
    def misplaced(state):
        sum = 0
        for i in range(4):
            for j in range(4):
                if state[i][j] == 0:
                    continue
                if state[i][j] != end_state[i][j]:
                    sum += 1
        return sum
    
    
    def A_star(start, Fx):
        root = Node(0, 0, start, hash(str(start)), None) # gn, hn, state hash_value, parent
        OPEN.append(root)
        heapq.heapify(OPEN)
        CLOSE.add(root.hash_value)
        while len(OPEN) != 0:
            top = heapq.heappop(OPEN)
            global node_num 
            node_num += 1
            if top.state == end_state:
                return print_path(top)
            for i in range(4):
                for j in range(4):
                    if top.state[i][j] != 0:
                        continue
                    for d in range(4):
                        new_x = i + dx[d]
                        new_y = j + dy[d]
                        if 0 <= new_x <= 3 and 0 <= new_y <= 3:
                            state = copy.deepcopy(top.state)
                            state[i][j], state[new_x][new_y] = state[new_x][new_y], state[i][j]
                            h = hash(str(state))
                            if h in CLOSE:
                                continue
                            CLOSE.add(h)
                            child = Node(top.gn+1, Fx(state), state, h ,top)
                            heapq.heappush(OPEN, child)
    
    
    if __name__ == '__main__':
        f = open('AStar_result.txt','w')
        for idx, test in enumerate(init_state):
            time1 = time.time()
            PATH = np.asarray(A_star(test, manhattan))
            time2 = time.time()
    
            test = np.asarray(test)
    
            for i, p in enumerate(PATH):  #路径打印
                if i == 0:
                     print("15-Puzzle initial state:")
                     print(p)
                     f.write("15-Puzzle initial state:\n")
                     f.write('%s\n\n' %(str(p)))
                else:
                    print('Move: %d' %(i))
                    print(p)
                    f.write('Move: %d \n' %(i))
                    f.write("%s \n" %(str(p)))
    
            print('Test %d, Total Step %d' %(idx+1, len(path)-1))
            print("Used Time %f" %(time2-time1), "sec")
            print("Expanded %d nodes" %(node_num))
    
            f.write('Test %d, Total Step %d \n' %(idx+1, len(path)-1))
            f.write("Used Time %f sec\n" %(time2-time1))
            f.write("Expanded %d nodes\n\n" %(node_num))
    
            OPEN.clear()
            CLOSE.clear()
            path.clear()
       
    

    A*优化后:

    #coding=utf-8
    import copy
    import heapq
    import numpy as np
    import time
    
    
    # 最终状态
    node_num  = 0
    end_state = (1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 0)
    
    # 初始状态测例集
    init_state = [
        (1, 15, 7, 10,9, 14, 4, 11, 8, 5,0 , 6, 13, 3, 2, 12),
        #(1, 7, 8, 10,6, 9, 15, 14, 13, 3, 0, 4, 11, 5, 12, 2),
        #(5, 6, 4, 12, 11, 14, 9, 1, 0, 3, 8, 15, 10, 7, 2, 13),
         #(14, 2, 8, 1, 7, 10, 4, 0, 6, 15, 11, 5, 9, 3, 13, 12),
    
        #(11, 3, 1, 7,4, 6 ,8 ,2,15 ,9 ,10, 13,14, 12, 5 ,0), 
         #(14, 10, 6, 0,4, 9 ,1 ,8,2, 3, 5 ,11,12, 13, 7 ,15),
        #(0, 5, 15, 14,7, 9, 6 ,13,1, 2 ,12, 10,8, 11, 4, 3),
       #  (6 ,10, 3, 15,14, 8, 7, 11,5, 1, 0, 2,13, 12, 9 ,4)
        ]
    
    
    # 方向数组
    dx = [0, -1, 0, 1]
    dy = [1, 0, -1, 0]
    
    OPEN = []
    
    CLOSE = set() # close表,用于判重
    
    path = []
    
    def print_path(node):
        if node.parent != None:
            print_path(node.parent)
        path.append(node.state)
        return path
    
    # 状态结点
    class Node(object):
        def __init__(self, gn=0, hn=0, state=None, parent=None):
           self.gn = gn
           self.hn = hn
           self.fn = self.gn + self.hn
           self.state = state
           self.parent = parent
    
        def __lt__(self, node): # heapq的比较函数
            if self.fn == node.fn:
                return self.gn > node.gn
            return self.fn < node.fn
    
    
    
    # 曼哈顿距离(注意:不需要计算‘0’的曼哈顿值,否则不满足Admittable)
    def manhattan(state): 
        M = 0 
        for t in range(16):
                if state[t] == end_state[t] or state[t]== 0:
                    continue
                else:
                    x =  (state[t] - 1) // 4   # 最终坐标
                    y =  state[t] - 4 * x - 1
                    dx = t // 4 # 实际坐标
                    dy = t % 4
                    M += (abs(x - dx) + abs(y - dy))
        return M
    
    
    def generateChild():  # 生成子结点
       movetable = [] # 针对数码矩阵上每一个可能的位置,生成其能够移动的方向列表
       for i in range(16):
           x, y = i % 4, i // 4
           moves = []
           if x > 0: moves.append(-1)    # 左移
           if x < 3: moves.append(+1)    # 右移
           if y > 0: moves.append(-4)    # 上移
           if y < 3: moves.append(+4)    # 下移
           movetable.append(moves) 
       def children(state):
           idxz = state.index(0) # 寻找数码矩阵上0的坐标
           l = list(state) # 将元组转换成list,方便进行元素修改
           for m in movetable[idxz]:
               l[idxz] = l[idxz + m] # 数码交换位置
               l[idxz + m] = 0
               yield(1, tuple(l)) # 临时返回
               l[idxz + m] = l[idxz]
               l[idxz] = 0
       return children
    
    
    def A_star(start, Fx): # start 为起始结点,Fx为启发式函数(这里采用曼哈顿距离)
        root = Node(0, 0, start, None) # 参数分别为 gn, hn,state, parent
    
        OPEN.append(root)
        heapq.heapify(OPEN)
    
        CLOSE.add(start)
        
        while len(OPEN) != 0:
            top = heapq.heappop(OPEN)
            global node_num  # 扩展的结点数
            node_num += 1
            if top.state == end_state: # 目标检测
                return print_path(top) #对路径进行打印
    
            generator = generateChild() #生成子结点
            for cost, state in generator(top.state): 
                if state in CLOSE: # CLOSE表为set容器,这里进行环检测
                    continue
                CLOSE.add(state)
                child = Node(top.gn+cost, Fx(state), state,top)
                heapq.heappush(OPEN, child) # 将child加入优先队列中
    
    
    if __name__ == '__main__':
        f = open('AStar_Result_M.txt','w')
        for idx, test in enumerate(init_state):
            time1 = time.time()
            PATH = np.asarray(A_star(test, manhattan))
            time2 = time.time()
    
            test = np.asarray(test)
    
            for i, p in enumerate(PATH):  #路径打印
                if i == 0:
                     print("15-Puzzle initial state:")
                     print(p)
                     f.write("15-Puzzle initial state:\n")
                     f.write('%s\n\n' %(str(p)))
                else:
                    print('Move: %d' %(i))
                    print(p)
                    f.write('Move: %d \n' %(i))
                    f.write("%s \n" %(str(p)))
    
            print('Test %d, Total Step %d' %(idx+1, len(path)-1))
            print("Used Time %f" %(time2-time1), "sec")
            print("Expanded %d nodes" %(node_num))
    
            f.write('Test %d, Total Step %d \n' %(idx+1, len(path)-1))
            f.write("Used Time %f sec\n" %(time2-time1))
            f.write("Expanded %d nodes\n\n" %(node_num))
    
            OPEN.clear()
            CLOSE.clear()
            path.clear()
        
    
    
    

    IDA*优化前:

    import numpy as np
    import time 
    import copy
    # 最终状态
    end_state = [[1, 2, 3, 4], [5, 6, 7, 8], [9, 10, 11, 12], [13, 14, 15, 0]]
    node_num = 0
    # 初始状态测例集
    init_state = [
       [[1, 15, 7, 10],[9, 14, 4, 11], [8, 5,0 , 6],[13, 3, 2, 12]],
     #  [[1, 7, 8, 10],[6, 9, 15, 14], [13, 3, 0, 4], [11, 5, 12, 2]],
       # [[5, 6, 4, 12], [11, 14, 9, 1], [0, 3, 8, 15], [10, 7, 2, 13]],
      #  [[14, 2, 8, 1], [7, 10, 4, 0], [6, 15, 11, 5], [9, 3, 13, 12]]
    
     #  [[11, 3, 1, 7],[4, 6 ,8 ,2],[15 ,9 ,10, 13],[14, 12, 5 ,0]],  
       # [[14, 10, 6, 0],[4, 9 ,1 ,8],[2, 3, 5 ,11],[12, 13, 7 ,15]],
       # [[0, 5, 15, 14],[7, 9, 6 ,13],[1, 2 ,12, 10],[8, 11, 4, 3]],
      # [[6 ,10, 3, 15],[14, 8, 7, 11],[5, 1, 0, 2],[13, 12, 9 ,4]]
    
        ]
    CLOSE = {}
    
    # 方向数组
    dx = [0, -1, 0, 1]
    dy = [1, 0, -1, 0]
    def is_goal(node):
    	index = 1
    	for row in node:
    		for col in row:
    			if(index != col):
    				break
    			index += 1
    	return index == 16
    # 曼哈顿距离(注意:不需要计算‘0’的曼哈顿值,否则不满足Admittable)
    def manhattan(state): 
        M = 0 
        for i in range(4):
            for j in range(4):
                if state[i][j] == end_state[i][j] or state[i][j] == 0:
                    continue
                # if state[i][j] == 0:
                #     x, y = 3, 3 
                else:
                    x = int((state[i][j] - 1) / 4)   # 最终坐标
                    y =  state[i][j] - 4 * x - 1
                    M += (abs(x - i) + abs(y - j))
        return M
    
    def misplaced(state):
        sum = 0
        for i in range(4):
            for j in range(4):
                if state[i][j] == 0:
                    continue
                if state[i][j] != end_state[i][j]:
                    sum += 1
        return sum
    
    def generateChild(state, Hx):  # 生成子结点
        child = [] # 用于保存生成的子结点
        for i in range(4):       
                for j in range(4):
                    if state[i][j] != 0:
                        continue
                    for d in range(4):
                        new_x = i + dx[d]
                        new_y = j + dy[d]
                        if 0 <= new_x <= 3 and 0 <= new_y <= 3:
                            new_state = copy.deepcopy(state)
                            new_state[i][j], new_state[new_x][new_y] = new_state[new_x][new_y], new_state[i][j]
                            child.append(new_state)
                    
        return sorted(child, key=lambda x: Hx(x))  # 将子结点进行排序,以H(n)递增排序
    
    
    def IDAsearch(path, g, Hx, bound): # 
        global node_num
        node = path[-1]  # 取出path中的start结点,这里相当于如果迭代超过了bound,回来继续迭代的开始结点,也就是path中的最后一个结点
        node_num +=1
      #  print(node_num)
        f = g + Hx(node) 
        if f > bound:      # 如果f(n)的值大于bound则返回f(n)
            return f
        if node == end_state: # 目标检测,以0表示找到目标
            return 0  
    
        Min = 99999
        CLOSE[str(node)] = g
       # print(CLOSE)
        for c in generateChild(node, Hx): # 遍历该结点所扩展的孩子结点
            #import pdb; pdb.set_trace()
            # if c not in path:  # 路径检测
            #     if str(c) in CLOSE: # 环检测
            #         f = g + 1 
            #         fp = CLOSE.get(str(c))
            #         if fp > f:
            #             print('in',c,CLOSE.get(str(c)) )
            #             CLOSE[str(c)] = f
            #         else: 
            #             continue
                path.append(c)
                t = IDAsearch(path, g+1, Hx, bound)
                if t == 0: # 如果得到的返回值为0,表示找到目标,迭代结束
                    return 0
                if t < Min: # 如果返回值不是0,说明f>bound,这时对Min进行更新,取值最小的返回值作为Min
                    Min = t
                path.pop() # 深搜回溯
    
        return Min
    
    def IDAstar(start, Hx):
        bound = Hx(start) # IDA*迭代限制
        path = [start] # 路径集合, 视为栈
        CLOSE[str(start)] = 0 
        #CLOSE.add(hash(str(start)))
    
        while(True):
            ans = IDAsearch(path, 0, Hx,bound) # path, g, Hx, bound
            if(ans == 0):
                return (path,bound)
            if ans == -1:
                return None
            bound = ans # 此处对bound进行更新
    
    
    if __name__ == '__main__':
        f = open('IDAStar_Difresult.txt','w')
        for idx, test in enumerate(init_state):
            time1 = time.time()
            PATH,BOUND = IDAstar(test, misplaced)
            time2 = time.time()
            PATH = np.asarray(PATH)
    
            test = np.asarray(test)
    
            for i, p in enumerate(PATH):  #路径打印
                if i == 0:
                     print("15-Puzzle initial state:")
                     f.write("15-Puzzle initial state:\n")
                    
                     p = np.asarray(p)
                     print(p)
                     f.write('%s\n\n' %(str(p)))
                else:
                    print('Move: %d' %(i))
                    
                    f.write('Move: %d \n' %(i))
                    p = np.asarray(p)
                    print(p)
                    f.write("%s \n" %(str(p)))
    
            print('Test %d, Total Step %d' %(idx+1, len(PATH)-1))
            print("Used Time %f" %(time2-time1), "sec")
            print("Expanded %d nodes" %(node_num))
            print("Bound: %d" %(BOUND))
    
            f.write('Test %d, Total Step %d \n' %(idx+1, len(PATH)-1))
            f.write("Used Time %f sec\n" %(time2-time1))
            f.write("Expanded %d nodes\n" %(node_num))
            f.write("Bound: %d\n\n" %(BOUND))
    
    

    IDA*优化后:

    import numpy as np
    import time 
    import copy
    # 最终状态
    end_state = (1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 0)
    node_num = 0
    # 初始状态测例集
    init_state = [
         (1, 15, 7, 10,9, 14, 4, 11, 8, 5,0 , 6, 13, 3, 2, 12),
        # (1, 7, 8, 10,6, 9, 15, 14, 13, 3, 0, 4, 11, 5, 12, 2),
        # (5, 6, 4, 12, 11, 14, 9, 1, 0, 3, 8, 15, 10, 7, 2, 13),
        # (14, 2, 8, 1, 7, 10, 4, 0, 6, 15, 11, 5, 9, 3, 13, 12),
    
      #  (11, 3, 1, 7,4, 6 ,8 ,2,15 ,9 ,10, 13,14, 12, 5 ,0),  
        # (14, 10, 6, 0,4, 9 ,1 ,8,2, 3, 5 ,11,12, 13, 7 ,15),
         (0, 5, 15, 14,7, 9, 6 ,13,1, 2 ,12, 10,8, 11, 4, 3),
         #(6 ,10, 3, 15,14, 8, 7, 11,5, 1, 0, 2,13, 12, 9 ,4)
    
        ]
    
    
    CLOSE = set() #  用于判重
    path = []
    
    # 方向数组
    dx = [0, -1, 0, 1]
    dy = [1, 0, -1, 0]
    
    # 曼哈顿距离(注意:不需要计算‘0’的曼哈顿值,否则不满足Admittable)
    def manhattan(state): 
        M = 0 
        for t in range(16):
                if state[t] == end_state[t] or state[t]== 0:
                    continue
                else:
                    x =  (state[t] - 1) // 4   # 最终坐标
                    y =  state[t] - 4 * x - 1
                    dx = t // 4 # 实际坐标
                    dy = t % 4
                    M += (abs(x - dx) + abs(y - dy))
        return M
    
    
    def generateChild():  # 生成子结点
       movetable = [] # 针对数码矩阵上每一个可能的位置,生成其能够移动的方向列表
       for i in range(16):
           x, y = i % 4, i // 4
           moves = []
           if x > 0: moves.append(-1)    # 左移
           if x < 3: moves.append(+1)    # 右移
           if y > 0: moves.append(-4)    # 上移
           if y < 3: moves.append(+4)    # 下移
           movetable.append(moves) 
       def children(state):
           idxz = state.index(0) # 寻找数码矩阵上0的坐标
           l = list(state) # 将元组转换成list,方便进行元素修改
           for m in movetable[idxz]:
               l[idxz] = l[idxz + m] # 数码交换位置
               l[idxz + m] = 0
               yield(1, tuple(l)) # 临时返回
               l[idxz + m] = l[idxz]
               l[idxz] = 0
       return children
    
    
    
    
    def IDAsearch(g, Hx, bound): 
        global node_num
        node = path[-1]  # 取出path中的start结点,这里相当于如果迭代超过了bound,回来继续迭代的开始结点,也就是path中的最后一个结点
        node_num +=1
        f = g + Hx(node) 
        if f > bound:      # 如果f(n)的值大于bound则返回f(n)
            return f
        if node == end_state: # 目标检测,以0表示找到目标
            return 0  
        
        Min = 99999 # 保存子结点中返回的最小的f值,作为下次迭代的bound
        generator = generateChild() # 获取generateChild()中生成的child
        for cost, state in generator(node):
            if state in CLOSE: continue
            path.append(state)
            CLOSE.add(state) # 利用set查找的优势,进行路径检测
            t = IDAsearch(g+1,Hx,bound)
    
            if t == 0: return 0
            if t < Min: Min = t
    
            path.pop() # 回溯
            CLOSE.remove(state) 
        return Min
       
    
    def IDAstar(start, Hx):
        global CLOSE
        global path
        bound = Hx(start) # IDA*迭代限制
        path = [start] # 路径集合, 视为栈
        CLOSE = {start}
    
    
        while(True):
            ans = IDAsearch(0, Hx,bound) # path, g, Hx, bound
            if(ans == 0):
                return (path,bound)
            if ans == -1:
                return None
            bound = ans # 此处对bound进行更新
    
    
    if __name__ == '__main__':
        f = open('IDAStar_result.txt','w')
        for idx, test in enumerate(init_state):
            time1 = time.time()
            PATH,BOUND = IDAstar(test, manhattan)
            time2 = time.time()
            PATH = np.asarray(PATH)
    
            test = np.asarray(test)
    
            for i, p in enumerate(PATH):  #路径打印
                if i == 0:
                     print("15-Puzzle initial state:")
                     f.write("15-Puzzle initial state:\n")
                    
                     p = np.asarray(p)
                     print(p)
                     f.write('%s\n\n' %(str(p)))
                else:
                    print('Move: %d' %(i))
                    
                    f.write('Move: %d \n' %(i))
                    p = np.asarray(p)
                    print(p)
                    f.write("%s \n" %(str(p)))
    
            print('Test %d, Total Step %d' %(idx+1, len(PATH)-1))
            print("Used Time %f" %(time2-time1), "sec")
            print("Expanded %d nodes" %(node_num))
            print("Bound: %d" %(BOUND))
    
            f.write('Test %d, Total Step %d \n' %(idx+1, len(PATH)-1))
            f.write("Used Time %f sec\n" %(time2-time1))
            f.write("Expanded %d nodes\n" %(node_num))
            f.write("Bound: %d\n\n" %(BOUND))
    
    

    文章出处登录后可见!

    已经登录?立即刷新

    共计人评分,平均

    到目前为止还没有投票!成为第一位评论此文章。

    (0)
    社会演员多的头像社会演员多普通用户
    上一篇 2023年4月5日
    下一篇 2023年4月5日

    相关推荐