基于Python_opencv的车牌识别系统

基于python_opencv的车牌识别系统

一、说明

根据现有的车牌识别系统,本人对代码进行了优化,原有功能:

1、对图片中的车牌号进行识别,并对车牌所属地可视化
2、将识别出的车牌号、车牌所属地等信息导出Excel表格
3、根据QtDesinger设计GUI界面,将程序系统化

添加功能:调用摄像头实时识别捕捉到的车牌信息,并可视化

链接: 最新代码传送门

下图分别是调用摄像头和直接识别图像的画面:

二、具体实现流程

整个项目为模块化处理,按文件分为:

  1. Recognition.py(识别模块)
  2. UI_main(主函数及UI模块)
  3. SVM训练模块
  4. 路由配置模块

Recognition模块

此模块问本项目的核心,主要包含的功能有:
1、读取图像
使用cv2.imdecode()函数将图片文件转换成流数据,赋值到内存缓存中,便于后续图像操作。使用cv2.resize()函数对读取的图像进行缩放,以免图像过大导致识别耗时过长。

    def __imreadex(self, filename):
        return cv2.imdecode(np.fromfile(filename, dtype=np.uint8), cv2.IMREAD_COLOR)

    def __point_limit(self, point):
        if point[0] < 0:
            point[0] = 0
        if point[1] < 0:
            point[1] = 0

2、图像预处理

    def __preTreatment(self, car_pic):
        if type(car_pic) == type("openc"):
            img = self.__imreadex(car_pic)
        else:
            img = car_pic
        pic_hight, pic_width = img.shape[:2]
        if pic_width > self.MAX_WIDTH:
            resize_rate = self.MAX_WIDTH / pic_width
            img = cv2.resize(img, (self.MAX_WIDTH, int(pic_hight * resize_rate)),
                             interpolation=cv2.INTER_AREA)  # 图片分辨率调整
        # cv2.imshow('Image', img)

3、利用投影法,根据设定的阈值和图片直方图,找出波峰,用于分隔字符,得到逐个字符图片

 def __find_waves(self, threshold, histogram):
        up_point = -1  # 上升点
        is_peak = False
        if histogram[0] > threshold:
            up_point = 0
            is_peak = True
        wave_peaks = []
        for i, x in enumerate(histogram):
            if is_peak and x < threshold:
                if i - up_point > 2:
                    is_peak = False
                    wave_peaks.append((up_point, i))
            elif not is_peak and x >= threshold:
                is_peak = True
                up_point = i
        if is_peak and up_point != -1 and i - up_point > 
            wave_peaks.append((up_point, i))
        return wave_peaks

    def __seperate_card(self, img, waves):
        part_cards = []
        for wave in waves:
            part_cards.append(img[:, wave[0]:wave[1]])
        return part_cards

4、高斯去噪
使用cv2.GaussianBlur()进行高斯去噪。使cv2.morphologyEx()函数进行开运算,再使用cv2.addWeighted()函数将运算结果与原图像做一次融合,从而去掉孤立的小点,毛刺等噪声。

        if blur > 0:
            img = cv2.GaussianBlur(img, (blur, blur), 0)
        oldimg = img
        img = cv2.cvtColor(img, cv2.COLOR_BGR2GRAY)



        kernel = np.ones((20, 20), np.uint8)
        img_opening = cv2.morphologyEx(img, cv2.MORPH_OPEN, kernel)  # 开运算
        img_opening = cv2.addWeighted(img, 1, img_opening, -1, 0);  # 与上一次开运算结果融合

5、排除不是车牌的矩形区域

car_contours = []
        for cnt in contours:
            # 框选 生成最小外接矩形 返回值(中心(x,y), (宽,高), 旋转角度)
            rect = cv2.minAreaRect(cnt)
            # print('宽高:',rect[1])
            area_width, area_height = rect[1]
            # 选择宽大于高的区域
            if area_width < area_height:
                area_width, area_height = area_height, area_width
            wh_ratio = area_width / area_height
            # print('宽高比:',wh_ratio)
            # 要求矩形区域长宽比在2到5.5之间,2到5.5是车牌的长宽比,其余的矩形排除
            if wh_ratio > 2 and wh_ratio < 5.5:
                car_contours.append(rect)
                # box = cv2.boxPoints(rect)
                # box = np.int0(box)
            # 框出所有可能的矩形
            # oldimg = cv2.drawContours(img, [box], 0, (0, 0, 255), 2)
            # cv2.imshow("Test",oldimg )

6、分割字符并识别车牌文字
使用cv2.threshold()函数进行二值化处理,再使用cv2.Canny()函数找到各区域边缘,使用cv2.morphologyEx()cv2.morphologyEx()两个函数分别进行一次开运算(先腐蚀运算,再膨胀运算)和一个闭运算(先膨胀运算,再腐蚀运算),去掉较小区域,同时填平小孔,弥合小裂缝。将车牌位置凸显出来

    def __identification(self, card_imgs, colors,model,modelchinese):
        # 识别车牌中的字符
        result = {}
        predict_result = []
        roi = None
        card_color = None
        for i, color in enumerate(colors):
            if color in ("blue", "yellow", "green"):
                card_img = card_imgs[i]
                # old_img = card_img
                # 做一次锐化处理
                kernel = np.array([[0, -1, 0], [-1, 5, -1], [0, -1, 0]], np.float32)  # 锐化
                card_img = cv2.filter2D(card_img, -1, kernel=kernel)
                # cv2.imshow("custom_blur", card_img)

                # RGB转GARY
                gray_img = cv2.cvtColor(card_img, cv2.COLOR_BGR2GRAY)
                # cv2.imshow('gray_img', gray_img)

                # 黄、绿车牌字符比背景暗、与蓝车牌刚好相反,所以黄、绿车牌需要反向
                if color == "green" or color == "yellow":
                    gray_img = cv2.bitwise_not(gray_img)
                # 二值化
                ret, gray_img = cv2.threshold(gray_img, 0, 255, cv2.THRESH_BINARY + cv2.THRESH_OTSU)
                # cv2.imshow('gray_img', gray_img)

                # 查找水平直方图波峰
                x_histogram = np.sum(gray_img, axis=1)
                # 最小值
                x_min = np.min(x_histogram)
                # 均值
                x_average = np.sum(x_histogram) / x_histogram.shape[0]
                x_threshold = (x_min + x_average) / 2
                wave_peaks = self.__find_waves(x_threshold, x_histogram)
                if len(wave_peaks) == 0:
                    continue

                # 认为水平方向,最大的波峰为车牌区域
                wave = max(wave_peaks, key=lambda x: x[1] - x[0])
                gray_img = gray_img[wave[0]:wave[1]]
                # cv2.imshow('gray_img', gray_img)

                # 查找垂直直方图波峰
                row_num, col_num = gray_img.shape[:2]
                # 去掉车牌上下边缘1个像素,避免白边影响阈值判断
                gray_img = gray_img[1:row_num - 1]
                # cv2.imshow('gray_img', gray_img)
                y_histogram = np.sum(gray_img, axis=0)
                y_min = np.min(y_histogram)
                y_average = np.sum(y_histogram) / y_histogram.shape[0]
                y_threshold = (y_min + y_average) / 5  # U和0要求阈值偏小,否则U和0会被分成两半

                wave_peaks = self.__find_waves(y_threshold, y_histogram)
                # print(wave_peaks)

                # for wave in wave_peaks:
                #	cv2.line(card_img, pt1=(wave[0], 5), pt2=(wave[1], 5), color=(0, 0, 255), thickness=2)
                # 车牌字符数应大于6
                if len(wave_peaks) <= 6:
                    #   print(wave_peaks)
                    continue

                wave = max(wave_peaks, key=lambda x: x[1] - x[0])
                max_wave_dis = wave[1] - wave[0]
                # 判断是否是左侧车牌边缘
                if wave_peaks[0][1] - wave_peaks[0][0] < max_wave_dis / 3 and wave_peaks[0][0] == 0:
                    wave_peaks.pop(0)

                # 组合分离汉字
                cur_dis = 0
                for i, wave in enumerate(wave_peaks):
                    if wave[1] - wave[0] + cur_dis > max_wave_dis * 0.6:
                        break
                    else:
                        cur_dis += wave[1] - wave[0]
                if i > 0:
                    wave = (wave_peaks[0][0], wave_peaks[i][1])
                    wave_peaks = wave_peaks[i + 1:]
                    wave_peaks.insert(0, wave)

                # 去除车牌上的分隔点
                point = wave_peaks[2]
                if point[1] - point[0] < max_wave_dis / 3:
                    point_img = gray_img[:, point[0]:point[1]]
                    if np.mean(point_img) < 255 / 5:
                        wave_peaks.pop(2)

                if len(wave_peaks) <= 6:
                    # print("peak less 2:", wave_peaks)
                    continue
                # print(wave_peaks)
                # 分割牌照字符
                part_cards = self.__seperate_card(gray_img, wave_peaks)

                # 分割输出
                #for i, part_card in enumerate(part_cards):
                #    cv2.imshow(str(i), part_card)

                # 识别
                for i, part_card in enumerate(part_cards):
                    # 可能是固定车牌的铆钉
                    if np.mean(part_card) < 255 / 5:
                        continue
                    part_card_old = part_card
                    w = abs(part_card.shape[1] - self.SZ) // 2

                    # 边缘填充
                    part_card = cv2.copyMakeBorder(part_card, 0, 0, w, w, cv2.BORDER_CONSTANT, value=[0, 0, 0])
                    # cv2.imshow('part_card', part_card)

                    # 图片缩放(缩小)
                    part_card = cv2.resize(part_card, (self.SZ, self.SZ), interpolation=cv2.INTER_AREA)
                    # cv2.imshow('part_card', part_card)

                    part_card = SVM_Train.preprocess_hog([part_card])

                    if i == 0:  # 识别汉字
                        resp = self.modelchinese.predict(part_card)  # 匹配样本
                        charactor = self.provinces[int(resp[0]) - self.PROVINCE_START]
                        # print(charactor)
                    else:  # 识别字母
                        resp = self.model.predict(part_card)  # 匹配样本
                        charactor = chr(resp[0])
                        # print(charactor)
                    # 判断最后一个数是否是车牌边缘,假设车牌边缘被认为是1
                    if charactor == "1" and i == len(part_cards) - 1:
                        if color == 'blue' and len(part_cards) > 7:
                            if part_card_old.shape[0] / part_card_old.shape[1] >= 7:  # 1太细,认为是边缘
                                continue
                        elif color == 'blue' and len(part_cards) > 7:
                            if part_card_old.shape[0] / part_card_old.shape[1] >= 7:  # 1太细,认为是边缘
                                continue
                        elif color == 'green' and len(part_cards) > 8:
                            if part_card_old.shape[0] / part_card_old.shape[1] >= 7:  # 1太细,认为是边缘
                                continue
                    predict_result.append(charactor)
                roi = card_img  # old_img
                card_color = color
                break

        return predict_result, roi, card_color  # 识别到的字符、定位的车牌图像、车牌颜色

UI_main模块

此模块主要包含UI界面的设计的控件,图片识别的入口函数,摄像头识别入口函数,Excel表格生成函数:

1、UI界面主类

class Ui_MainWindow(object):

    def __init__(self):
        self.RowLength = 0
        self.Data = [['文件名称', '录入时间', '车牌号码', '车牌类型', '识别耗时', '车牌信息']]

    def setupUi(self, MainWindow):
        MainWindow.setObjectName("MainWindow")
        MainWindow.resize(1213, 680)
        MainWindow.setFixedSize(1213, 680)  # 设置窗体固定大小
        MainWindow.setToolButtonStyle(QtCore.Qt.ToolButtonIconOnly)

        self.centralwidget = QtWidgets.QWidget(MainWindow)    #图片区域
        self.centralwidget.setObjectName("centralwidget")
        self.scrollArea = QtWidgets.QScrollArea(self.centralwidget)
        self.scrollArea.setGeometry(QtCore.QRect(690, 10, 511, 491))
        self.scrollArea.setWidgetResizable(False)
        self.scrollArea.setObjectName("scrollArea")
        self.scrollAreaWidgetContents = QtWidgets.QWidget()
        self.scrollAreaWidgetContents.setGeometry(QtCore.QRect(10, 10, 509, 489))
        self.scrollAreaWidgetContents.setObjectName("scrollAreaWidgetContents")

        self.label_0 = QtWidgets.QLabel(self.scrollAreaWidgetContents)
        self.label_0.setGeometry(QtCore.QRect(10, 10, 111, 20))
        font = QtGui.QFont()
        font.setPointSize(11)
        self.label_0.setFont(font)
        self.label_0.setObjectName("label_0")
        self.label = QtWidgets.QLabel(self.scrollAreaWidgetContents)
        self.label.setGeometry(QtCore.QRect(10, 40, 481, 441))
        self.label.setObjectName("label")
        self.label.setAlignment(Qt.AlignCenter)

        self.scrollArea.setWidget(self.scrollAreaWidgetContents)
        self.scrollArea_2 = QtWidgets.QScrollArea(self.centralwidget)
        self.scrollArea_2.setGeometry(QtCore.QRect(10, 10, 671, 631))
        self.scrollArea_2.setWidgetResizable(True)
        self.scrollArea_2.setObjectName("scrollArea_2")
        self.scrollAreaWidgetContents_1 = QtWidgets.QWidget()
        self.scrollAreaWidgetContents_1.setGeometry(QtCore.QRect(0, 0, 669, 629))
        self.scrollAreaWidgetContents_1.setObjectName("scrollAreaWidgetContents_1")
        self.label_1 = QtWidgets.QLabel(self.scrollAreaWidgetContents_1)
        self.label_1.setGeometry(QtCore.QRect(10, 10, 111, 20))
        font = QtGui.QFont()
        font.setPointSize(11)
        self.label_1.setFont(font)
        self.label_1.setObjectName("label_1")

        self.tableWidget = QtWidgets.QTableWidget(self.scrollAreaWidgetContents_1)  #设置布局
        self.tableWidget.setGeometry(QtCore.QRect(10, 40, 651, 581))  # 581))
        self.tableWidget.setObjectName("tableWidget")
        self.tableWidget.setColumnCount(6)
        self.tableWidget.setColumnWidth(0, 106)  # 设置1列的宽度
        self.tableWidget.setColumnWidth(1, 106)  # 设置2列的宽度
        self.tableWidget.setColumnWidth(2, 106)  # 设置3列的宽度
        self.tableWidget.setColumnWidth(3, 106)  # 设置4列的宽度
        self.tableWidget.setColumnWidth(4, 106)  # 设置5列的宽度
        self.tableWidget.setColumnWidth(5, 106)  # 设置6列的宽度
        self.tableWidget.setHorizontalHeaderLabels(["图片名称", "录入时间", "识别耗时", "车牌号码", "车牌类型", "车牌信息"])
        self.tableWidget.setRowCount(self.RowLength)
        self.tableWidget.verticalHeader().setVisible(False)  # 隐藏垂直表头
        self.tableWidget.setEditTriggers(QAbstractItemView.NoEditTriggers)
        self.tableWidget.raise_()

        self.scrollArea_2.setWidget(self.scrollAreaWidgetContents_1)
        self.scrollArea_3 = QtWidgets.QScrollArea(self.centralwidget)
        self.scrollArea_3.setGeometry(QtCore.QRect(690, 510, 341, 131))
        self.scrollArea_3.setWidgetResizable(True)
        self.scrollArea_3.setObjectName("scrollArea_3")
        self.scrollAreaWidgetContents_3 = QtWidgets.QWidget()
        self.scrollAreaWidgetContents_3.setGeometry(QtCore.QRect(0, 0, 339, 129))
        self.scrollAreaWidgetContents_3.setObjectName("scrollAreaWidgetContents_3")
        self.label_2 = QtWidgets.QLabel(self.scrollAreaWidgetContents_3)
        self.label_2.setGeometry(QtCore.QRect(10, 10, 111, 20))

        font = QtGui.QFont()
        font.setPointSize(11)
        self.label_2.setFont(font)
        self.label_2.setObjectName("label_2")
        self.label_3 = QtWidgets.QLabel(self.scrollAreaWidgetContents_3)
        self.label_3.setGeometry(QtCore.QRect(10, 40, 321, 81))
        self.label_3.setObjectName("label_3")
        self.scrollArea_3.setWidget(self.scrollAreaWidgetContents_3)
        self.scrollArea_4 = QtWidgets.QScrollArea(self.centralwidget)
        self.scrollArea_4.setGeometry(QtCore.QRect(1040, 510, 161, 131))
        self.scrollArea_4.setWidgetResizable(True)
        self.scrollArea_4.setObjectName("scrollArea_4")
        self.scrollAreaWidgetContents_4 = QtWidgets.QWidget()
        self.scrollAreaWidgetContents_4.setGeometry(QtCore.QRect(0, 0, 159, 129))
        self.scrollAreaWidgetContents_4.setObjectName("scrollAreaWidgetContents_4")

        self.pushButton_2 = QtWidgets.QPushButton(self.scrollAreaWidgetContents_4)
        self.pushButton_2.setGeometry(QtCore.QRect(10, 50, 80, 30))
        self.pushButton_2.setObjectName("pushButton_2")

        self.pushButton = QtWidgets.QPushButton(self.scrollAreaWidgetContents_4)
        self.pushButton.setGeometry(QtCore.QRect(10, 90, 80, 30))
        self.pushButton.setObjectName("pushButton")

        self.pushButton_3 = QtWidgets.QPushButton(self.scrollAreaWidgetContents_4)
        self.pushButton_3.setGeometry(QtCore.QRect(100, 50, 50, 70))
        self.pushButton_3.setObjectName("pushButton_3")

        self.label_4 = QtWidgets.QLabel(self.scrollAreaWidgetContents_4)
        self.label_4.setGeometry(QtCore.QRect(10, 10, 111, 20))
        font = QtGui.QFont()
        font.setPointSize(11)
        self.label_4.setFont(font)
        self.label_4.setObjectName("label_4")

        self.scrollArea_4.setWidget(self.scrollAreaWidgetContents_4)
        MainWindow.setCentralWidget(self.centralwidget)
        self.statusbar = QtWidgets.QStatusBar(MainWindow)
        self.statusbar.setObjectName("statusbar")
        MainWindow.setStatusBar(self.statusbar)

        self.retranslateUi(MainWindow)
        QtCore.QMetaObject.connectSlotsByName(MainWindow)

        self.retranslateUi(MainWindow)
        QtCore.QMetaObject.connectSlotsByName(MainWindow)
        self.pushButton.clicked.connect(self.__openimage)  # 设置点击事件
        self.pushButton_2.clicked.connect(self.__writeFiles)  # 设置点击事件
        self.pushButton_3.clicked.connect(self.__openVideo)  #设置事件

        self.retranslateUi(MainWindow)
        QtCore.QMetaObject.connectSlotsByName(MainWindow)
        self.ProjectPath = os.getcwd()  # 获取当前工程文件位置

    def retranslateUi(self, MainWindow):
        _translate = QtCore.QCoreApplication.translate
        MainWindow.setWindowTitle(_translate("MainWindow", "车牌识别系统"))
        self.label_0.setText(_translate("MainWindow", "原始图片:"))
        self.label.setText(_translate("MainWindow", ""))
        self.label_1.setText(_translate("MainWindow", "识别结果:"))
        self.label_2.setText(_translate("MainWindow", "车牌区域:"))
        self.label_3.setText(_translate("MainWindow", ""))
        self.pushButton.setText(_translate("MainWindow", "打开文件"))
        self.pushButton_2.setText(_translate("MainWindow", "导出数据"))
        self.pushButton_3.setText(_translate("MainWindow", "摄像"))
        self.label_4.setText(_translate("MainWindow", "控制面板:"))
        self.scrollAreaWidgetContents_1.show()

2、识别入口函数

    def __vlpr(self, path):
        PR = PlateRecognition()
        result = PR.VLPR(path)
        return result

3、写入及导出Excel表格文件

    def __show(self, result, FileName):
        # 显示表格
        self.RowLength = self.RowLength + 1
        if self.RowLength > 18:
            self.tableWidget.setColumnWidth(5, 157)
        self.tableWidget.setRowCount(self.RowLength)
        self.tableWidget.setItem(self.RowLength - 1, 0, QTableWidgetItem(FileName))
        self.tableWidget.setItem(self.RowLength - 1, 1, QTableWidgetItem(result['InputTime']))
        self.tableWidget.setItem(self.RowLength - 1, 2, QTableWidgetItem(str(result['UseTime']) + '秒'))
        self.tableWidget.setItem(self.RowLength - 1, 3, QTableWidgetItem(result['Number']))
        self.tableWidget.setItem(self.RowLength - 1, 4, QTableWidgetItem(result['Type']))
        if result['Type'] == '蓝色牌照':
            self.tableWidget.item(self.RowLength - 1, 4).setBackground(QBrush(QColor(3, 128, 255)))
        elif result['Type'] == '绿色牌照':
            self.tableWidget.item(self.RowLength - 1, 4).setBackground(QBrush(QColor(98, 198, 148)))
        elif result['Type'] == '黄色牌照':
            self.tableWidget.item(self.RowLength - 1, 4).setBackground(QBrush(QColor(242, 202, 9)))
        self.tableWidget.setItem(self.RowLength - 1, 5, QTableWidgetItem(result['From']))

        # 显示识别到的车牌位置
        size = (int(self.label_3.width()), int(self.label_3.height()))
        shrink = cv2.resize(result['Picture'], size, interpolation=cv2.INTER_AREA)
        shrink = cv2.cvtColor(shrink, cv2.COLOR_BGR2RGB)
        self.QtImg = QtGui.QImage(shrink[:], shrink.shape[1], shrink.shape[0], shrink.shape[1] * 3,
                                  QtGui.QImage.Format_RGB888)
        self.label_3.setPixmap(QtGui.QPixmap.fromImage(self.QtImg))

    def __writexls(self, DATA, path):
        wb = xlwt.Workbook();
        ws = wb.add_sheet('Data');

        for i, Data in enumerate(DATA):
            for j, data in enumerate(Data):
                ws.write(i, j, data)
        wb.save(path)
        QMessageBox.information(None, "成功", "数据已保存!", QMessageBox.Yes)

    def __writecsv(self, DATA, path):
        f = open(path, 'w')
        # DATA.insert(0, ['文件名称','录入时间', '车牌号码', '车牌类型', '识别耗时', '车牌信息'])
        for data in DATA:
            f.write((',').join(data) + '\n')
        f.close()
        QMessageBox.information(None, "成功", "数据已保存!", QMessageBox.Yes)

    def __writeFiles(self):
        path, filetype = QFileDialog.getSaveFileName(None, "另存为", self.ProjectPath,
                                                     "Excel 工作簿(*.xls);;CSV (逗号分隔)(*.csv)")
        if path == "":  # 未选择
            return
        if filetype == 'Excel 工作簿(*.xls)':
            self.__writexls(self.Data, path)
        elif filetype == 'CSV (逗号分隔)(*.csv)': #逗号分隔开
            self.__writecsv(self.Data, path)

4、图片识别入口

    def __openimage(self):
        path, filetype = QFileDialog.getOpenFileName(None, "选择文件", self.ProjectPath,
                                                     "JPEG Image (*.jpg);;PNG Image (*.png);;JFIF Image (*.jfif)")  # ;;All Files (*)
        if path == "":  # 未选择文件
            return
        filename = path.split('/')[-1]

        # 尺寸适配
        size = cv2.imdecode(np.fromfile(path, dtype=np.uint8), cv2.IMREAD_COLOR).shape
        if size[0] / size[1] > 1.0907:
            w = size[1] * self.label.height() / size[0]
            h = self.label.height()
            jpg = QtGui.QPixmap(path).scaled(w, h)
        elif size[0] / size[1] < 1.0907:
            w = self.label.width()
            h = size[0] * self.label.width() / size[1]
            jpg = QtGui.QPixmap(path).scaled(w, h)
        else:
            jpg = QtGui.QPixmap(path).scaled(self.label.width(), self.label.height())

        self.label.setPixmap(jpg)    #保存jpg
        result = self.__vlpr(path)  #识别
        if result is not None:
            self.Data.append(
                [filename, result['InputTime'], result['Number'], result['Type'], str(result['UseTime']) + '秒',
                 result['From']])
            self.__show(result, filename)
        else:
            QMessageBox.warning(None, "Error", "无法识别此图像!", QMessageBox.Yes)

5、摄像头识别入口

    def __openVideo(self):
        cap = cv2.VideoCapture(0)
        while True:
            success, img = cap.read()
            img1 = cv2.flip(img, 1)
            cv2.imshow("VideoData", img1)

            k = cv2.waitKey(1)

            if cv2.getWindowProperty('VideoData', cv2.WND_PROP_VISIBLE) < 1:
                break
            elif k == ord("s"):
                cv2.imwrite("index2.jpg", img1)   #读取摄像头
                cv2.destroyAllWindows()
        cap.release()

6、重写MainWindow窗口

class MainWindow(QtWidgets.QMainWindow):

    def closeEvent(self, event):
        reply = QtWidgets.QMessageBox.question(self, '提示',
                                               "是否要退出程序?\n提示:退出后将丢失所有识别数据",
                                               QtWidgets.QMessageBox.Yes | QtWidgets.QMessageBox.No,
                                               QtWidgets.QMessageBox.No)
        if reply == QtWidgets.QMessageBox.Yes:
            event.accept()
        else:
            event.ignore()

SVM训练模块

此模块主要用于对模型的准确性进行训练,包含字符中英文、数字的识别、图片尺寸的训练,最后将模型保存在svmchinese.dat中:


import cv2
import os
import numpy as np
from numpy.linalg import norm
from args import args

class StatModel(object):
    def load(self, fn):
        self.model = self.model.load(fn)

    def save(self, fn):
        self.model.save(fn)

class SVM(StatModel):
    def __init__(self, C=1, gamma=0.5):
        self.model = cv2.ml.SVM_create()
        self.model.setGamma(gamma)
        self.model.setC(C)
        self.model.setKernel(cv2.ml.SVM_RBF)
        self.model.setType(cv2.ml.SVM_C_SVC)
        # 不能保证包括所有省份

    # 训练svm
    def train(self, samples, responses):
        self.model.train(samples, cv2.ml.ROW_SAMPLE, responses)

    # 字符识别
    def predict(self, samples):
        r = self.model.predict(samples)
        return r[1].ravel()

# 定义参数
SZ = args.Size  # 训练图片长宽
MAX_WIDTH = args.MAX_WIDTH  # 原始图片最大宽度
Min_Area = args.Min_Area  # 车牌区域允许最大面积
PROVINCE_START = args.PROVINCE_START
provinces = args.provinces

# 来自opencv的sample,用于svm训练
def deskew(img):
    m = cv2.moments(img)
    if abs(m['mu02']) < 1e-2:
        return img.copy()
    skew = m['mu11'] / m['mu02']
    M = np.float32([[1, skew, -0.5 * SZ * skew], [0, 1, 0]])
    img = cv2.warpAffine(img, M, (SZ, SZ), flags=cv2.WARP_INVERSE_MAP | cv2.INTER_LINEAR)
    return img

# 来自opencv的sample,用于svm训练
def preprocess_hog(digits):
    samples = []
    for img in digits:
        gx = cv2.Sobel(img, cv2.CV_32F, 1, 0)
        gy = cv2.Sobel(img, cv2.CV_32F, 0, 1)
        mag, ang = cv2.cartToPolar(gx, gy)
        bin_n = 16
        bin = np.int32(bin_n * ang / (2 * np.pi))
        bin_cells = bin[:10, :10], bin[10:, :10], bin[:10, 10:], bin[10:, 10:]
        mag_cells = mag[:10, :10], mag[10:, :10], mag[:10, 10:], mag[10:, 10:]
        hists = [np.bincount(b.ravel(), m.ravel(), bin_n) for b, m in zip(bin_cells, mag_cells)]
        hist = np.hstack(hists)

        # transform to Hellinger kernel
        eps = 1e-7
        hist /= hist.sum() + eps
        hist = np.sqrt(hist)
        hist /= norm(hist) + eps

        samples.append(hist)
    return np.float32(samples)

def train_svm(path):
    # 识别英文字母和数字
    Model = SVM(C=1, gamma=0.5)
    # 识别中文
    Modelchinese = SVM(C=1, gamma=0.5)
    # 英文字母和数字部分训练
    chars_train = []
    chars_label = []

    for root, dirs, files in os.walk(os.path.join(path,'chars')):
        if len(os.path.basename(root)) > 1:
            continue
        root_int = ord(os.path.basename(root))
        for filename in files:
            print('input:{}'.format(filename))
            filepath = os.path.join(root, filename)
            digit_img = cv2.imread(filepath)
            digit_img = cv2.cvtColor(digit_img, cv2.COLOR_BGR2GRAY)
            chars_train.append(digit_img)
            chars_label.append(root_int)

    chars_train = list(map(deskew, chars_train))
    chars_train = preprocess_hog(chars_train)
    chars_label = np.array(chars_label)
    Model.train(chars_train, chars_label)

    if not os.path.exists("svm.dat"):
        # 保存模型
        Model.save("svm.dat")
    else:
        # 更新模型
        os.remove("svm.dat")
        Model.save("svm.dat")

    # 中文部分训练
    chars_train = []
    chars_label = []

    for root, dirs, files in os.walk(os.path.join(path,'charsChinese')):
        if not os.path.basename(root).startswith("zh_"):
            continue
        pinyin = os.path.basename(root)
        index = provinces.index(pinyin) + PROVINCE_START + 1  # 1是拼音对应的汉字
        for filename in files:
            print('input:{}'.format(filename))
            filepath = os.path.join(root, filename)
            digit_img = cv2.imread(filepath)
            digit_img = cv2.cvtColor(digit_img, cv2.COLOR_BGR2GRAY)
            chars_train.append(digit_img)
            chars_label.append(index)
    chars_train = list(map(deskew, chars_train))
    chars_train = preprocess_hog(chars_train)
    chars_label = np.array(chars_label)
    Modelchinese.train(chars_train, chars_label)

    if not os.path.exists("svmchinese.dat"):
        # 保存模型
        Modelchinese.save("svmchinese.dat")
    else:
        # 更新模型
        os.remove("svmchinese.dat")
        Modelchinese.save("svmchinese.dat")

if __name__ == '__main__':
    train_svm('train')
    print('完成')

路由配置模块


from _collections import OrderedDict
# 导入Flask类
from flask import Flask, request, jsonify
from json_utils import jsonify
import numpy as np
import cv2
import time
from collections import OrderedDict
from Recognition import PlateRecognition

# 实例化
app = Flask(__name__)
PR = PlateRecognition()

# 设置编码-否则返回数据中文时候-乱码
app.config['JSON_AS_ASCII'] = False

# route()方法用于设定路由;类似spring路由配置
@app.route('/', methods=['POST'])  # 在线识别
def forecast():
    # 获取输入数据
    stat = time.time()
    file = request.files['image']
    img_bytes = file.read()
    image = np.asarray(bytearray(img_bytes), dtype="uint8")
    image = cv2.imdecode(image, cv2.IMREAD_COLOR)
    RES = PR.VLPR(image)
    if RES is not None:
        result = OrderedDict(
            Error=0,
            Errmsg='success',
            InputTime=RES['InputTime'],
            UseTime='{:.2f}'.format(time.time() - stat),  # RES['UseTime'],
            Number=RES['Number'],
            From=RES['From'],
            Type=RES['Type'],
            List=RES['List'])
    else:
        result = OrderedDict(
            Error=1,
            Errmsg='unsuccess')
    return jsonify(result)


if __name__ == '__main__':
    # app.run(host, port, debug, options)
    # 默认值:host=127.0.0.1(localhost), port=5000, debug=false
    app.run()

    # 本地路由地址,局域网下的主机均可通过该地址完成POST请求
    # app.run(host='192.168.1.100' )

    # 部署到服务器
    # from waitress import serve
    # serve(app, host=' IP  ', port=5000)


文章出处登录后可见!

已经登录?立即刷新

共计人评分,平均

到目前为止还没有投票!成为第一位评论此文章。

(0)
xiaoxingxing的头像xiaoxingxing管理团队
上一篇 2023年4月22日
下一篇 2023年4月22日

相关推荐